Posts Tagged X02T

Toshiba X02T (TG01) :: running Android on WinMobile phone

Last year I’ve got WinMobile phone (Toshiba X02T) from SoftBank, also known as TG01 in the rest of the world. I did not like it very much, so basically it slept in the box unused. Recently I’ve noticed some new development and decided to give Android a try, since I really enjoy to run games and software on large 4.1″ screen.

If you don’t like to read the whole thread on XDA-dev, here’s a quick summary: buttons, screen and sound do work, anything wireless (WiFi, GPS, calls, SMS, network access) does not (yet). So, it’s a bit early to use this on everyday phone, but quite good enough to install software and play games.

Current version of Android cannot be flashed to device, but works from SD card instead. To start Android you have to boot Windows first, run Explorer, scroll the file list and click on the .exe file, which will unload Windows and load Linux/Android, which works until power off. Next time the power is on, Windows boots up again, which is good, since I don’t want to lose the warranty and official support.

Linux boots on X02T

Android installation

Installation is quite simple. First you have to download the necessary software (there might be a new version, it’s a good idea to check the original thread for the new version if you are reading this after 2011.01.01). Then, I really loathe this step, you have to find 7zip to unpack the file, since the usual unzip will not work. After the file is unpacked, copy the “Android” folder to the SD card in your X02T phone. There should be some empty space left on the card, since additional files will be created when Android is run for the first time.

To run Android, first start the Explorer, go to SD card, open folder “Android” and run “clrcad.exe” (nothing visible will happen), then “haret.exe”. You should get the Linux boot screen.

Android Home on X02T

It might take a few minutes, and possibly a reboot or two, since hardware is checked and some files are created, but finally there will be initial setup screen and Android home page. Once you got there, everything else is quite easy.

You may read the system log with: adb logcat

The battery indicator might not work, so it’s a good idea to keep the USB cable connected. However, since we need to run the programs from SD card, the USB mode should be changed to ActiveSync once the files are successfully copied to the SD card.

Also, it’s a good idea to watch the temperature of the phone back side to avoid overheating.

Angry Birds on X02T

How to install the software?

Software installation can be done over USB link with ADB:

$ adb install AngryBirds_1.3.5.apk
* daemon not running. starting it now *
* daemon started successfully *
2546 KB/s (13466519 bytes in 5.165s)
pkg: /data/local/tmp/AngryBirds_1.3.5.apk
- waiting for device -
$

, ,

No Comments